When the Trail Gets Tough, Recovery Matters
You hit a muddy section of the trail, the tyres spin, and suddenly your ATV or UTV isn't going anywhere. A normal ride can turn into a recovery job fast when the terrain gets tougher than you planned for.
The U.S. Consumer Product Safety Commission says ATV riders should follow basic safety practices and take proper precautions when riding off-road. It matters because rough terrain throws surprises at you, and being ready is part of riding responsibly.
If you want recovery gear on hand before you need it, the Ops Winch from Vessel Powersports gives you a 3,500 lb rated line pull, 50 feet of synthetic rope, and more than one way to control it.
A winch needs enough pulling capacity for the situations you're likely to run into. This one has a 3,500 lb rated line pull, which gives you solid capacity for ATV and UTV recovery.
It also runs a 166:1 gear ratio and a 1.2 HP motor. Those two specs are worth a look when you're judging how the winch delivers its pulling force.
The winch is listed as universal, but you still need the right mounting setup for your specific machine.
Recovery rarely happens in clean, dry conditions. Mud, water, and trail debris come with the territory, so the winch's critical parts need protection.
The Black Ops 3500 LB. ATV/UTV Winch has waterproof seals and a waterproof solenoid, and it comes with a water-resistant receiver for the wireless remote. That matters most in the same wet, muddy spots where an ATV or UTV tends to get stuck.
Instead of traditional steel cable, the winch comes with 50 feet of synthetic rope.
The kit pairs it with an aluminum hawse fairlead, which guides the rope as it spools onto the winch. A rope stopper and hook pull strap are included too, so you get more than just the winch itself.
You won't always be able to stand in the same spot during a recovery. Having more than one way to run the winch makes things a lot easier.
The kit includes:
Wireless remote with water-resistant receiver
Handlebar rocker switch
Heavy-gauge extended wiring
Waterproof solenoid
The wiring is long enough for four-seater machines. The wireless remote also lets you operate the winch without depending only on the rocker switch.
The Black Ops 3500 includes more than the winch itself. Here's what's in the box:
3,500 lb Black Ops winch
50' synthetic rope
Wireless remote with water-resistant receiver
Handlebar rocker switch
Heavy-gauge extended wiring
Waterproof solenoid
4.3" aluminum hawse fairlead
Winch mount plate
Winch hook kit
Hook pull strap
Rope stopper
All hardware and instructions
One thing to know before you install it: the machine-specific winch mount is not included. You'll need the correct mount for your particular make and model.
The winch has a 3.00" x 4.87" mounting pattern, but the right mounting solution depends on your ATV or UTV.
So check your machine's mounting requirements before you order, not just the winch itself. Universal doesn't mean every ATV or UTV can take it without the proper mount. A quick check now can save you a compatibility headache at install time.
A stuck ATV or UTV can turn a normal ride into a tough recovery. Having the right winch on hand gives you a dedicated tool for the times your machine can't get out on its own.
With its 3,500 lb rated line pull, 50-foot synthetic rope, waterproof seals, automatic brake, wireless remote, and included recovery hardware, the Black Ops 3500 packs a practical mix of features for off-road recovery.
At Vessel Powersports, the goal is to get riders the equipment they need for their particular setup. Before you install this winch, confirm your machine's mounting requirements and follow the included instructions for safe use.
Yes. It's listed as a universal ATV/UTV winch with a 3,500 lb rated line pull. You will still need the right machine-specific mount to install it.
The kit comes with 50 feet of synthetic rope, paired with a 4.3-inch aluminum hawse fairlead.
Yes. You get a wireless remote with a water-resistant receiver, plus a handlebar rocker switch as a second control option.
The kit includes a winch mount plate, but the machine-specific winch mount for your ATV or UTV is not included. Separately, you will have to select one.
It should be confirmed whether there is a proper mounting system available for the ATV/UTV you have that will allow mounting of the winch with a 3.00" x 4.87" mounting pattern. In addition, verify the winch, cable, and mounting hardware.
Item added to your wish List
Item added to your Compare List