Upgrade Your Recovery Game with Our Tiger Tail Mounts

October 21, 2025

ByChris Nichols 0 Comments

Upgrade Your Recovery Game with Our Tiger Tail Mounts

Off-road riding isn’t just about speed and power—it’s also about being prepared. If you’re pulling hard through mud, winching out a buddy, or just hauling gear, having the right mounting hardware makes all the difference. That’s where our Tiger Tail Mounts for the Honda line come into play.

Why a Dedicated Mount Matters

When you rely on a recovery strap or winch-assist system, the weakest link tends to be the mount. With no cutting or bodging required, a precision mount gives you:

• Secure attachment to factory points.

• Durable construction that stands up to rugged terrain and recovery loads.

• Clean, purpose-built installation — no hacking or drilling if done right.

Our mounts are built from heavy-duty steel, finished in a textured black powder-coat for corrosion resistance and trail durability. (Those are key call-outs from our product listings.)

Fitment #1: 2014+ Honda Foreman / Rancher SRA

If you ride a 2014 or newer Honda Foreman or Rancher with Solid Rear Axle (SRA), this mount is made for you. Fitment includes:

• 2014+ Honda Rancher 420 (SRA)

• 2014+ Honda Foreman 500

• 2020+ Honda Foreman 520

Key features:

• Direct bolt-on installation — no cutting, no drilling. 

• Recovery-ready design for the Tiger Tail self-recoiling strap (strap not included).

• Heavy-duty steel with powder-coated textured black finish.

• All hardware included for the install. 

What this means for you:
Strapping a self-recoiling Tiger Tail strap onto a mount built just for your machine means faster recoveries, cleaner installs and far fewer trips back to camp to tweak or repair gear. The fact that it bolts right in means you spend less time in the garage and more time on the trail.

Fitment #2: 2015+ Honda Rubicon / Rancher IRS

For those running an Independent Rear Suspension (IRS) Honda—namely 2015+ Rancher 420 IRS, 2015-19 Rubicon 500, 2020+ Rubicon 520—we’ve got you covered too.
This is the 2″ hitch receiver mount that plays nice with the Tiger Tail system. Fitment includes:

• 2015+ Honda Rancher 420 IRS

• 2015-2019 Honda Rubicon 500

• 2020+ Honda Rubicon 520

Key features:

• Built from ¼″ steel for unmatched strength. 

• OEM fitment at factory mounting points — simple bolt-on. 

• Works perfectly with the Tiger Tail (or similar recovery tools). 

• Textured black powder coat finish for rust & scratch resistance. 

• Built-in tie-down loops for straps or chains — a nice bonus.

Why this matters for the IRS crowd:
Independent rear suspension models tend to be more premium and offer a different ride feel—and your recovery mount should match that level of build. With this hitch receiver mount, you get full 2″ hitch compatibility (so you can haul trailers or gear) and the rugged recovery mount for the Tiger Tail—giving you utility + trail readiness in one piece.

Which Mount For Which Setup?

• If your machine is a 2014 or newer Honda Foreman or Rancher with SRA, go with the Tiger Tail Mount (bolt-on) described above.

• If your machine is a 2015 or newer Honda Rancher or Rubicon with IRS (independent rear suspension), you’ll want the 2″ Hitch Receiver + Tiger Tail compatible mount.

Even if you’ve been grazing tree-lines for years, upgrading your recovery mount is one of the most under-appreciated upgrades out there. When you’re stuck and a buddy’s winch is sluggish, you’ll be glad you had the proper system bolted on instead of MacGyvering something at the trailhead.

Install Tips & Best Practices

• Before you begin: clean the mounting area of any dirt or corrosion and inspect factory bolts for condition.

• Use a torque wrench to ensure bolts are tightened to manufacturer or mount-supplier spec; this ensures both safety and long term durability.

• Route your strap or cable so it clears moving suspension parts or hot exhausts—especially on IRS models.

• After install, go for a gentle test pull (in a safe area) to verify everything is secure and aligned.

• Always inspect the mount and hardware after heavy recovery use; look for cracks, wear, or loosening hardware.

• Remember: the Tiger Tail strap is meant for steady, controlled pulls or winch connections only. It is not designed for snatching or jerking another machine. Doing so can damage the recoil mechanism (and void the warranty).

Final Thoughts

Whether you’re working a trail, hauling firewood back from camp, or need to recover a buddy from a swampy bog, outfitting your Honda machine with a proper Tiger Tail mount is a no-brainer. The right fitment, strong construction, and purpose-built design make the difference between a struggle and a smooth recovery.

Don’t settle for generic recovery hardware—choose the mount built for your machine, bolt it on, and be ready for the next ride.

Ready to gear up? Head over to the product listing on our site, pick the correct fitment for your machine, and leave the trail with confidence.

Chris Nichols