Installing, Uninstalling, and Storing Your Tracking Systems

Tracking Systems September 12, 2024

ByPriyanka Sharma 0 Comments

Tracking systems for All-Terrain Vehicles (ATVs) are becoming increasingly popular· These systems provide an extra layer of security, ensuring that your ATV can be easily located if it's ever lost or stolen· Whether you're an avid off-roader or just use your ATV occasionally, knowing how to install, uninstall, and store your tracking system is crucial for maintaining its functionality· This blog will guide you through each step in simple terms, making it easy for anyone to understand and follow·

Why Use a Tracking System?

Before we begin the process of installation, let's talk about why the tracking system will be a great advantage for your ATV· Since ATVs are mostly used in remote areas, they become more and more prone to theft· A tracking system updates you in real time about the location of your vehicle· Apart from that, some insurance companies will give you discounts if your ATV is installed with a tracking device·

Preparation of Installation

Gather all the needed tools and material before commencing the installation process· You will usually want to have the following items ready to go: the tracking device itself; a set of basic tools, screwdrivers, and wrenches; electrical tape; zip ties; your ATV manual· Also, it will be very good at this stage to go through the manual of the tracking system to familiarize yourself with its installation process·

Step-by-Step Installation

1· Choose the Right Location

Installation of your tracking system starts with choosing a proper location on your ATV· It has to be well-hidden but not prevented from receiving GPS signals· Usually, it is installed under the seat or inside the front or rear fender, close to the battery compartment· Ensure the spot you will have chosen will be secure and won't interfere with the operation of your ATV·

2· Install the Device

Once you've found a spot, mount the tracker snugly with screws or zip ties· The tracker must be attached in such a way that it cannot move or shift around while the ATV is in use· If the back is adhesive, the surface should be cleaned and dry before the device is attached to it·

3· Connect the Power Source

Most tracking devices require some sort of power source, which is typically hooked up to the ATV's battery· Connect the device's power wires accordingly to the correct terminals using the instructions provided by the manufacturer· Typically, the red wire connects to the positive terminal, and the black wire to the negative terminal· Use electrical tape to fasten the connections, as well as to prevent wires from coming undone·

Removing the Tracking System

There may be times you will want to uninstall the tracking system installed in your car probably to transfer it into another vehicle, or for whatever reason, or upgrade into a new device· How do you do it safely? Here's how:

1· Disconnect the Power

To uninstall the tracking system, first disconnect it from power· The first thing you need to do is locate the wires connected to the ATV battery; pull them off carefully· Recall that you should always disconnect the negative terminal-or black wire-prior to disconnecting the positive terminal, or red wire·

2· Remove the Device

After the power supply to the device has been disconnected, you can remove the tracking device from its point of attachment· If it's screwed in place, use a screwdriver for removal· If it happens to be held with zip ties, cut them off carefully with a pair of scissors or wire cutters; be gentle to avoid damage to the device·

3· Inspect the Area

Once the device has been removed, you will want to look at where it was mounted to· Check for any damages or wear that may have occurred while the device was installed· Clean the area if needed and repair any damages so your ATV remains in good condition·

Hiding the Tracking System

If you're going to reinstall your tracking system later or install it in another vehicle, then proper storage is paramount· Here's how you can store it correctly:

1· Store in a Safe Place

Place the tracker in a safe, dry area, and away from exposure to extreme temperatures or moisture· A sound, dehusking box, or storage container with padding is good for keeping the device away from damage· Avoid storing it in a garage or shed where it may be exposed to dust or other elements·

2· Label the Components

If you have several components in your tracker, such as mounting brackets and power cables, then label these and store them in one container for ease of relocation of the device without loss of important parts·

4· Check the Battery (If Applicable)

If your tracking device uses a rechargeable battery, you'll want to check periodically while in storage, so you know the battery level· Keeping it charged means the device is ready when you are· If the battery is removable, you may want to store it separately and recharge it every few months·

Let's Recap

Installation, uninstallation, and storage of your ATV tracking system are all relatively simple processes that can be done by anyone with a little preparation and care· These easy steps will keep your tracking system functional and ready to use at any time· Whether you are mounting it for the first time or stowing and saving it for later, it is extra time well spent in return for peace of mind when you know your ATV is safe· 

Priyanka Sharma